|
 |
 |
| The bolt in its new position. |
|
 |
| Now saw off the overlaying part. |
|
 |
| Ready! |
|
 |
| Now we got enough space in depth for the camera module. |
|
 |
| To cause no problems with Pleos hard- and software, we won't remove his original camera. Instead we just fold it to the inside. Because it has a metal backside, we'll have to isolate it, so it won't cause any short ciruits ... |
|
 |
| ... |
|
 |
| The camera is out of the way. |
|
 |
| This one was a little challenging: Because there is still not enough space at the bottom, we'll have to remove the horizontal IR-circiut board. |
|
 |
| First we have top desolder the connection to the 'main board'. |
|
 |
| Then carefully remove the board. |
|
|
