|  |  | | The thing on the upper left is the microphone, the one in the middle the back of the ccd-sensor-board and on the right the RF-board. | |  | | We need four wires to gain more distance. | |  | | Replacing the (short) white wires with the longer ones... | |  | | ... | |  | Now we also replace the short power-wires by wires of approx. 40 cm. Later we will connect them to Pleos main battery. Update: If we use Pleos native power supply, the image quality gets horrible when a servo starts to move. This effect is independent from shielding. So later on, we'll build in our own power supply. | |  | | ... | |  | | Now, we saw and grind the front part of the spy cams housing. | |  | | ... | |  | | ... | |  | | Screw out the pinhole lens. | | |
|
|
|
