|  |  | | ... |  |  | | By the way: We clued the microphone of the RF-Cam to the position of an opening by one of Pleos nostrils. |  |  | | When everything is in place, cut the wires of the IR-components and solder them to the right solder joints. |  |  | | The connections. |  |  | | Some electrical tape will keep the light of the facing down IR-LED 'on track'. |  |  | | Looks alright. |  |  | | Finally attach the inductivity sensors back on. |  |  | | It's working! |  |  | | ... |  |  | The internal power supply of the spy cam:
We had some difficulties to install a working power supply for the spy cam inside Pleo. A first attempt, connecting the spy cam directly to Pleos battery failed due to the bad image quality when Pleo was moving. A second try using a diassembled cheap 9V-block rechargeable battery showed no picture at all. It seem, I underestimated the power consumption of the cam.
Now we're working with two high performance 9V-Ni-MH rechargeable batteries connect in parallel. |  | |
|
|
|